Festo 547220 Electroválvula

VSVA-B-M52-MH-A1-3AC1

$155,60 2 uds. con envío de 1 a 3 días a United States

Especificaciones

Series (VSVA) Standards-based valve VSVA
Directional control valve type (B) Sub-base valve
Design principle Piston spool
Valve function (M52) 5/2-way valve, single solenoid/monostable
Reset method for monostable/single solenoid valves (M) Mechanical spring
Pilot air Internal
Manual override (H) Non-detenting
Pneumatic connection (A1) 26 mm (01) ISO 15407-1/-2
Nominal operating voltage (3A) 230 V AC/50-60 Hz
Electrical connection (C1) Plug pattern type C, to EN 175301-803
Position sensing None
Type of piloting Pilot actuated
Pilot control interface To ISO 15218
Material seals HNBR NBR
Material screws Steel Galvanised
Type of actuation Electric
Standard nominal flow rate 1.100 l/min
Operating voltage 230V AC
Design Piston gate valve
CE mark (see declaration of conformity) To EU Low Voltage Directive
Degree of protection IP65 NEMA 4
Exhaust-air function With flow control option
Mounting position optional
Manual override Non-detenting
Flow direction Non-reversible
lap Positive overlap
Pilot pressure 3 bar ... 10 bar
Flow rate of valve on individual sub-base 1.100 l/min
Switching time off 56 ms
Duty cycle 100%
Permissible voltage fluctuations -15%/+10%
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
Shock resistance Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27
Media temperature -5 °C ... 50 °C
Sound pressure level 85 dB(A)
Ambient temperature -5 °C ... 50 °C
Product weight 180 g
Type of mounting On sub-base
Auxiliary pilot air port 14 Sub-base size 26 mm to ISO 15407-1
Pneumatic connection, port 1 Sub-base size 26 mm to ISO 15407-1
Pneumatic connection, port 3 Sub-base size 26 mm to ISO 15407-1
Pneumatic connection, port 5 Sub-base size 26 mm to ISO 15407-1
Note on materials RoHS-compliant
Material housing Die-cast aluminium
Valve function 5/2-way, monostable
Valve size 26 mm
pneumatic working port Sub-base size 26 mm to ISO 15407-1 Sub-base size 01 to VDMA 24563 G1/4
Operating pressure 3 bar ... 10 bar
Type of reset Mechanical spring
CE marking (see declaration of conformity) To UK instructions for EMC
Nominal size 9 mm
Sealing principle Soft
Conforms to standard ISO 15407-1 VDMA 24563
Pilot air supply Internal
Symbol 991.003
Signal status display LED
Flow rate of valve 1.400 l/min
Flow rate of pneumatically interlinked valve 1.100 l/min
Switching time on 26 ms
Characteristic coil data 230 V AC: 50/60 Hz, pick-up power 2.9 VA, holding power 2.1 VA
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Vibration resistance Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6
Corrosion resistance class CRC 0 - No corrosion stress
Relative air humidity 0 - 90%
Pilot medium Compressed air to ISO 8573-1:2010 [7:4:4]
Max. tightening torque for valve mounting 2 Nm
Electrical connection Type C With protective earth conductor To DIN EN 175301-803
Auxiliary pilot air port 12 Sub-base size 26 mm to ISO 15407-1
Pilot exhaust port 82/84 Ducted Not ducted as per standard
Pneumatic connection, port 2 Sub-base size 26 mm to ISO 15407-1
Pneumatic connection, port 4 Sub-base size 26 mm to ISO 15407-1
$155,60
Stock 2 uds.
Referencia 547220
Fabricante Festo
Unidades Precio / Unidad
1+ $155,60

  • Registro abierto
    Crea una cuenta en el momento
  • Soporte 24/7
    Pregúntanos a cualquier hora
  • 100% Seguro
    Solo pagos seguros: transferencia bancaria, tarjeta de cédito y PayPal
  • Descuentos por volumen
    Optimice sus suministros