Festo VUVG
846 Productos
Descubre todas las condifuraciones disponibles para la serie de produtos Festo VUVG Solenoid valve. Encuentra el producto correcto filtrado por Directional control valve type, Design principle, Size, Valve function, Reset method for monostable/single solenoid valves, Pilot air, Manual override, Pneumatic connection, Exhaust, Nominal operating voltage, Electrical connection y Circuitry.
Códigos del producto VUVG
| Serie | Formato de número de catálogo | Descripción |
|---|---|---|
| VUVG | VUVG- - - - | Solenoid valve |
| 001 | Series |
|---|---|
| VUVG | Solenoid valve |
| 002 | Directional control valve type |
| L | In-line valve |
| S | Semi-inline valve |
| B | Sub-base valve |
| 003 | Design principle |
| Piston spool | |
| K | Piston spool with sealing ring |
| 004 | Size |
| 10A | Size 10, deviating fl ow |
| 10 | Size 10 |
| 14 | Size 14 |
| 18 | Size 18 |
| 005 | Pilot air |
| Internal | |
| Z | External |
| 005 | Valve function |
| T32U | 2x3/2-way valve, normally open |
| T32C | 2x3/2-way valve, normally closed |
| T32H | 2x3/2-way valve, 1x normally closed, 1x normally open |
| B52 | 5/2-way valve, double solenoid/bistable |
| M52 | 5/2-way valve, single solenoid/monostable |
| P53U | 5/3-way valve, mid-position pressurised |
| P53E | 5/3-way valve, mid-position exhausted| |
| P53C | 5/3-way valve, mid-position closed |
| 006 | Reset method for monostable/single solenoid valves |
| None | |
| A | Pneumatic spring |
| M | Mechanical spring |
| R | Mixed, pneumatic/mechanical spring |
| 007 | Pilot air |
| Internal | |
| Z | External |
| 008 | Manual override |
| None | |
| H | Non-detenting |
| S | Covered |
| Y | Detenting |
| T | Non-detenting, detenting with accessories |
| 009 | Pneumatic connection |
| M3 | M3 |
| G18 | G1/8 |
| G14 | G1/4 |
| M5 | M5 |
| M7 | M7 |
| Q4H | Push-in connector 4 mm, with connecting thread M7 |
| Q6H | Push-in connector 6 mm, with connecting thread M7 |
| Q3 | Push-in connector 3 mm |
| Q4 | Push-in connector 4 mm |
| Q6 | Push-in connector 6 mm |
| Q8 | Push-in connector 8 mm |
| Q10 | Push-in connector 10 mm |
| T18 | Push-in connector 1/8” |
| T532 | Push-in connector 5/32” |
| T316 | Push-in connector 3/16” |
| T316H | Push-in connector for 3/16”, M7 |
| T14 | Push-in connector 1/4” |
| T14H | Push-in connector for 1/4”, M7 |
| T38 | Push-in connector 3/8” |
| T516 | Push-in connector 5/16” |
| T516H | Push-in connector 5/16”, M7 |
| F | Flange/sub-base |
| 010 | Exhaust |
|---|---|
| QN | With fi tting |
| No fi tting | |
| U | Silencer |
| 011 | Nominal operating voltage |
| None | |
| 1 | 24 V DC |
| 1A | 24 V AC/50-60 Hz |
| 4 | 5 V DC |
| 5 | 12 V DC |
| 012 | Electrical connection |
| None | |
| P3 | Without electrical sub-base |
| C1 | Plug pattern type C, to EN 175301-803 |
| E1 | Individual connection with plug base |
| H2 | Connection pattern H, horizontal plug |
| H3 | Connection pattern H, vertical plug |
| S2 | Connection pattern S, horizontal plug |
| S3 | Connection pattern S, vertical connector |
| L1 | Leads 0.5 m |
| L2 | Leads 1 m |
| L3 | Leads 2.5 m |
| L4 | Leads 5 m |
| K6 | Cable 0.5 m |
| K7 | Cable 1 m |
| K8 | Cable 2.5 m |
| K9 | Cable 5 m |
| R8 | Individual connector M8, 3-pin |
| R1 | Individual connector M8, 4-pin |
| R3 | Individual plug M12, to EN 61076-2-101 |
| P1 | Interface for pilot valve (CNOMO small) |
| 013 | Circuitry |
| None | |
| R | Holding current reduction with integrated protective circuit |