Especificaciones
Series (VZWD) | Solenoid valve, directly actuated VZWD |
---|---|
Directional control valve type (L) | In-line valve |
Valve function (M22C) | 2/2-way valve, normally closed |
Reset method for monostable/single solenoid valves (M) | Mechanical spring |
Process valve connection (G14) | G1/4 |
Nominal width (20) | 2 mm |
Sealant (V) | FPM |
---|---|
Nominal operating voltage (2A) | 110 V AC/50-60 Hz |
Electrical connection (P4) | Plug socket, 3-wire |
Pressure of medium [bar] (15) | 15 |
Corrosion protection | Standard |
Valve function | 2/2-way, closed, monostable | ||
Standard nominal flow rate | 140 l/min | ||
Switching time off | 10 ms | ||
Material housing | Brass | ||
Material seals | FPM | ||
CE mark (see declaration of conformity) | To EU Low Voltage Directive | ||
Degree of protection | IP65 | ||
Design | Directly actuated poppet valve | ||
Sealing principle | Soft | ||
Type of mounting | In-line installation | ||
Electrical connection | Type A Plugs To EN 175301-803 Square design | ||
Manual override | None | ||
Medium | Compressed air to ISO 8573-1:2010 [7:4:4] Inert gases Mineral oil Water Neutral fluids Other media on request | ||
Pressure difference | 0 psi | ||
Insulation material class | F | ||
Duty cycle | 100% | ||
Type of piloting | Direct | ||
Medium pressure | 0 psi ... 217,5 psi | ||
Media temperature | -10 °C ... 80 °C | ||
Leakage rate to EN 12266-1 | A |
Flow rate Kv | 0,13 m³/h | ||
Switching time on | 25 ms | ||
Note on materials | Contains paint-wetting impairment substances RoHS-compliant | ||
Material number housing | CW614N | ||
Product weight | 350 g | ||
CE marking (see declaration of conformity) | To UK regulations for electrical equipment | ||
Corrosion resistance class CRC | 1 - Low corrosion stress | ||
Type of actuation | Electric | ||
Mounting position | optional | ||
Connection Process valve | G1/4 | ||
Nominal size | 2 mm | ||
Flow direction | Non-reversible | ||
Nominal pressure PN | 50 | ||
Characteristic coil data | 110 V AC: 50/60 Hz, pick-up power 10.5 VA, holding power 8.0 VA | ||
Permissible voltage fluctuations | +/- 10 % | ||
Type of reset | Mechanical spring | ||
Symbol | 992.979 | ||
Max. viscosity | 22 mm²/s | ||
Ambient temperature | -10 °C ... 35 °C |
Stock | Pedir cotización |
---|---|
Referencia | 1491908 |
Fabricante | Festo |
Unidades | Precio / Unidad |
---|---|
1+ | $91,32 |