| Design | Angled design Diaphragm valve | ||
| Sealing principle | Soft | ||
| Type of mounting | Screw-clamped Via thread | ||
| Process valve port 2 | G2 | ||
| Valve function | 2/2-way, closed, monostable | ||
| Flow direction | Non-reversible | ||
| Pressure difference | 0,35 bar | ||
| Type of piloting | Pilot actuated | ||
| Medium pressure | 0,35 bar ... 8 bar | ||
| Ambient temperature | -20 °C ... 60 °C | ||
| Switching time on | ≤ 30 ms | ||
| Note on materials | Contains paint-wetting impairment substances RoHS-compliant | ||
| Material number housing | EN AC-47100D | ||
| Material screws | High-alloy stainless steel | ||
| Material plunger tube | High-alloy steel | ||
| Product weight | 2.800 g | ||
| Corrosion resistance class CRC | 3 - high corrosion stress |
| Type of actuation | Electric | ||
| Mounting position | optional | ||
| Connection, process valve 1 | G2 | ||
| Nominal size | 50 mm | ||
| Manual override | None | ||
| Medium | Compressed air to ISO 8573-1:2010 [7:4:4] | ||
| Type of reset | Mechanical spring | ||
| Symbol | 995.358 | ||
| Note on operating and pilot medium | Lubricated operation not possible | ||
| Flow rate Kv | 78 m³/h | ||
| Switching time off | ≤ 100 ms | ||
| Material housing | Die-cast aluminium | ||
| Material seals | NBR | ||
| Material number screw | 1,43 | ||
| Material membrane | NBR-PA | ||
| Degree of protection | IP65 | ||
| Max. tightening torque for connecting thread | 300 Nm |
