Rexroth WMDA
46 Productos
Descubre todas las configuraciones disponibles para la serie de produtos Rexroth WMDA Multiple. Encuentra el producto correcto filtrando por Main ports, Symbols, Throttle insert y Seal Material.
Códigos del producto WMDA
| Serie | Formato de número de catálogo | Descripción |
|---|---|---|
| WMDA | - -6- - | Multiple |
Códigos del producto para el catálogo WMDA,
- -6- -
| 01 | Main ports |
|---|---|
| 3 | 3 main ports |
| 4 | 4 main ports |
| 02 | Series |
| WMR | Roller plunger (see page 12) |
| WMRZ | Roller plunger (see page 12) |
| WMU | Roller plunger (see page 12) |
| WMM | Hand lever |
| WMD | Rotary knob |
| WMDA | Lockable rotary knob |
| 03 | Size |
| 6 | Size 6 |
| 04 | Symbols |
| D | D |
| W | W |
| E | E |
| GA | GA |
| HB | HB |
| J | J |
| JA | JA |
| LB | LB |
| T | T |
| H | H |
| M | M |
| C | C |
| J73A | J73A |
| Y | Y |
| R | R |
| A | A |
| GB | GB |
| G | G |
| F | F |
| L | L |
| JB | JB |
| TB | TB |
| B | B |
| U | U |
| EA | EA |
| EB | EB |
| Q | Q |
| W5 | W5 |
| MB | MB |
| RB | RB |
| W13 | W13 |
| MA | MA |
| UA | UA |
| WB | WB |
| FA | FA |
| E1 | E1 |
| V | V |
| HA | HA |
| LA | LA |
| E19 | E19 |
| PA | PA |
| E168 | E168 |
| E65 | E65 |
| P | P |
| X7 | X7 |
| QB | QB |
| TA | TA |
| 05 | Component series |
|---|---|
| 5X | Component series 50 to 59 (50 to 59: Unchanged installation and connection dimensions) |
| 6X | Component series 60 to 69 (60 to 69: Unchanged installation and connection dimensions) (only version WMRZ) |
| 06 | Spring return |
| With spring return (version WMR, WMRZ, WMU, WMM) | |
| F | Without spring return with detent (version WMM, WMD, WMDA) |
| 07 | Corrosion protection |
| Standard corrosion protection | |
| J | Improved corrosion protection |
| 08 | Spool position monitoring |
| Without position switch | |
| QMAG24 | Monitored spool position a |
| QMBG24 | Monitored spool position b |
| QM0G24 | Monitored rest position |
| 09 | Throttle insert |
| Without throttle insert | |
| B08 | Throttle Ø 0.8 mm [0.0315 inch] |
| B10 | Throttle Ø 1.0 mm [0.0394 inch] |
| B12 | Throttle Ø 1.2 mm [0.0472 inch] |
| 10 | Clamping length |
| 42 mm [1.65 inch] (standard) | |
| Z | 22 mm [0.87 inch] (only version WMRZ) |
| 11 | Seal material |
| NBR seals | |
| V | FKM seals |
| 12 | Locating hole |
| Without locating hole | |
| 60 | With locating hole |
| 62 | With locating hole and locking pin ISO 8752-3x8-St |