| Bore diameter | d | 8 | mm |
| Outside diameter | D | 32 | mm |
| Width | B | 20 | mm |
| Basic dynamic load rating, axial | Ca | 12,500 | |
| Fatigue load limit, axial | Cua | 740 | N |
| Thermally permissible speed | nϑ | 9,500 |
| Bore diameter lower tolerance | -0,01 | mm | |
| Outside diameter lower tolerance | -0,01 | mm | |
| Width lower tolerance | -0,25 | mm | |
| Basic static load rating, axial | C0a | 16,300 | |
| Limiting speed for grease lubrication | nG Grease | 15,500 |
| Minimum diameter shaft shoulder | da min | 11 | mm |
| Screw size | M5 |
| Maximum diameter of shaft shoulder | da max | 25 | mm |
| Number of screws | n | 4 |
| Rib diameter inner ring | d1 | 19 | mm |
| Thickness of flange | C1 | 8 | mm |
| Pitch circle diameter (holes) | J | 40 | mm |
| Minimum chamfer dimension | rmin | 0,60 | mm |
| Fixing boring diameter | d2 | 5,50 | mm |
| Flange width | A | 35 | mm |
